Taramps Automotive Digital Voltmeter and Sequencer VTS 5.1 Blue LED Automotive Car Audio 5 Sequencer Outputs SPL Mode Voltage Protection, Digital Display, Car Audio Monitor, Black

Product Description

1 VTS 5.1 Introduction

2 Functions

VTS 5.1 MAIN SPECS

Measurement Range 6V ~ 30VDC Standby Consumption 0,1mA Rated Consumption (On) 100mA Number of Sequencer Outputs 5 Sequencer Output Capacity 150mA Low Battery Protection 9V (Outputs from S1 to S5 are off) Low Battery Indication When the battery drops below 10.2V, the display will start flashing High Battery Protection Turns off outputs S1 to S5 if the voltage surpasses 16.5V (default) or 19.5V (SPL Mode) Dimensions (WxHxD) 3.46″ x 0.76″ x 2.08″ Weight 0.25lb

All functions are accessed by pressing the FCN key, sequentially.
The activation of mixers and/or audio processors should preferably be done at the S1 output for a correct sequential activation (when switching on, from S1 to S5 and when switching off, from S5 to S1), thus avoiding unwanted transients when switching on the amplifier (popularly known as “pop”).
IMPORTANT: Outputs S1 to S5 are intended only for activating (REMOTE input) of the sound equipment.
Voltage Check: With the VTS 5.1 without the remote signal it is possible to check the voltage of the batteries, press FCN and the voltage will be displayed and whenever you want to turn off the display press FCN again.
Function SPL:Press FCN for about 10 seconds until “SPL” and “On” appear. This function increases the overvoltage protection (default = 16.5V) to about 19.5V. To deactivate this function, press FCN again for 10 seconds, until “SPL”and “OFF”appear on the display.