63In Full – Auto Pneumatic Low Temperature Cold Laminating Machine Auto/Manual Mode, 1.38In Laminating Thickness, Large Format Roll Laminator for Commercial Office

Product Description

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. 63In Full-Auto Pneumatic Laminating Machine Merchant Video

EQCOTWEA 63In Full-Auto Pneumatic Low Temperature Laminating Machine

Features 63in/1600mm soft rubber rollers, with roller Dia of 5.12in (130mm), Max. 10m/min laminating speed and Max 1.38in laminating thickness.

The films with or without bottom paper both can be used by our laminator machine.

Maximum Laminating Width 63In (1600mm) Maximum Laminating Thickness 1.38In (35mm) Laminating Speed Adjustable, 10m/min Roller Diameter 5.12in (130mm) Motor Power 110V 120W Heating Rod Power 1500W Roller Lifting Way Double Cylinder Linkage Lifting System Roller Heating Type Within the Infrared Heating Temperature Adjusting Range Room temperature to 60C/140F Preheating Time 10-15min Material of Rollers Silicone material of Rubber Roller Net weight 293Lb Whole Size about 78.84×24.41×53.15in(200x62x135cm) Brake Casters Four Universal Casters with two Brake User-friendly Design Foot Switch and Emergency Stop Button Note This laminator should be used with 8L air compressor, but the Air compressor NOT included, it should prepared by yourself.

Compact Metal Structure Fine Workmanship

Better, Efficient Laminating Experience

Metal Structure: Constructed with high-quality metal materials, more sturdy, humanized vertical design, easy to operate.Microcomputer Control Panel: Featuring with microcomputer control panel, users can freely select laminating functions.Full-Auto Laminating: Designed with film support rods to handle both lined and liner-free films.Integrate Lamination and Cutting Operation: Design with four cutting devices can remove white edges from prints and precisely cut them into sections as required.

Set Parameters as Needed

Intelligent Microcomputer Control Panel

Hot Light/Cold Light/Ready Light: Means the roller of machine working under hot or cold state.And ready light means the roller surface temperature has reached the set value.M/A Switch: Under Auto model, the machine can keep running at the speed set; under Manual model, the machine is controlled by the feet pedal.Forward/Backward Switch: Control the direction of roller running, usually used during film installing.Speed Adjust Button: Adjust the laminating speed.Hot/Cold Switch

Film Supporting Rod/Film Stripping Rod

Film Supporting Rod: Effectively support films with/without liner paper; Can be conveniently assembled and disassembled; Selected for supporting different films as needed.

Film Stripping Rod: Large-diameter aluminum alloy rod, can effectively reduce vibration and noise in the working process.

Soft Rubber Rollers and Pressure Gauge

Soft Rubber Rollers: it is heat temperature resistant rubber roller, Max 63in laminating width, Max 10m/min laminating speed; And the roller can ascend and descend pneumatically.

The Pressure Gauge: display the pressure in real time, the user can observe and monitor the pressure change conveniently.

Tensioning Knobs/Pneumatic Lifting Control Handle

Tensioning Knobs: used for adjusting the tensioning degree of all supporting rods, can control the film at any time and improve the film laminating effect.

Pneumatic Lifting Control Handle: be used to manually control the rubber roller to move up and down.

Emergency Switch/Intelligent Control Panel

Emergency Switch: can be used to immediately stop the machine in emergency, can be easily pressed and rotated.

Intelligent Control Panel: the user can select the proper laminating function and set different parameters easily. Also the laminating state can be clearly displayed.

Foot Pedal/Four Cutting Devices

Foot Pedal: the user can precisely control the laminating process by hand and foot cooperative operation, also the manual mode and automatic mode can be quickly switched.

Four Cutting Devices: can effectively remove the white edges of drawings and precisely cut the drawings into sections as needed.

The Collecting Rods/Universal Wheels

The Collecting Rods: can easily collect the finished products and back paper. Durable structure and convenient to remove and install.

Universal Wheels: Adopt four universal casters, the laminator can be easily moved. Also with two brakes, the laminator can keep more stable when laminating.

This automatic pneumatic laminator features 63in/1600mm soft rubber rollers, with roller Dia of 5.12in (130mm), Max. 10m/min laminating speed and Max 1.38in laminating thickness.
This laminator need to connect to 8L air compressor, with pneumatic lifting control handle enables manual adjustment of the rubber roller to move up and down. The air compressor not included.
Featuring with microcomputer control panel, users can freely select laminating functions, cold Laminating or hot Laminating, adjustable temperature Max 60℃, manual mode and auto mode, forward/backward of roller running, adjust speed,ect. Set parameters as needed and monitor laminating status clearly.
Designed with film support rods to handle both lined and liner-free films. The large-diameter aluminum alloy stripping rod reduces vibration during laminating.
Four cutting devices can be flexibly installed on the supporting rod to efficiently remove white edges from prints and precisely cut them into sections as required. Lamination and cutting processes can be performed at the same time to enhance efficiency.
The emergency switch can be used to immediately stop the machine in emergency, can be easily pressed and rotated, effectively protect the personal safety and provides safety guarantee for operators.
Widely applicable for laminating wedding photos, posters, advertising images, book covers, documents, calligraphy, paintings, invitations and more. Ideal for use in advertising, printing, photography and packaging industries.